---

OSA 3700 Passive Hydrogen Maser

Passive Hydrogen Maser Frequency Standard is designed for Modern Time and Frequency applications, such as Metrology, Time Scale, Time comparison, Deep Space mission + VLBI require highly stable frequency references. Meeting such stringent specifications requires the implementation of a Primary Frequency Reference that generates signals with an accuracy better than 1E-12 at all times and very high frequency stability (typ sy(t) # 7x10-13 t-1/2 in the time domain.

 

OSA 4520 GPS-SP

OSA 4520 GPS-SP is a stand-alone GPS receiver module specially designed to supply precise timing as specified ITUT-T G.811 and G.812. The unit consists of a GPS-receiver circuit, a high-performance OCXO oscillator and an input interface for standard synchronisation signals together with a variable voltage power supply. The OSA 4520 GPS-SP is fully equipped with an internal OCXO oscillator which f ilters out the noise from the received GPS signal, thus providing a G.811 signal output. The unit also provides jitter & wander filtering and a holdover capability according to ITU-T G.812.

 

---

OSA 4530 GPS-LN
	The OSA 453x Series is a natural choice as a synchronisation source for UMTS, WCDMA and cdmaOne, as well as GPRS, CDMA and TDMA base station and mobile switches. Their 1 PPS and 10MHz outputs make them ideal for synchronising DAB/DVB and WiMAX equipment. The Low Noise (LN) series is provided with low phase noise characteristics required by stringent Time and Frequency applications.

 

---

OSA 5225 - Network Time Protocol Server
	The OSA 5225 Time Node is a precise time center featuring two configurable synchronization inputs for redundancy and several outputs. The OSA 5225 can be configured as a secure and redundant NTP Time Server as well as a time distributor of many other time protocols and formats.

 

---

OSA 5220 - Network Time Protocol Server
	The OSA 5220 NTP Server is a Stratum 1 NTP server which provide you an economic and easy synchronization of your Ethernet TCP/IP network.

 

---

OSA 5020 LOW NOISE DISTRIBUTION UNIT (LND)
	A compact, high quality frequency distribution solution for OEM and integrators. The OSA 5020 is specifically designed for applications where the phase noise characteristic is extremely important such as satellites tracking stations or time and frequency laboratories.

 

---

OSA 5021 IRIG Distribution

A compact, cost efficient, high quality IRIG distribution solution for OEM and integrators. The OSA 5021 is specifically designed for applications where the IRIG distribution is important. The OSA 5021 IRIG Distribution unit is very easy to install. The unit does not require any type of configuration as the output signals are direct image of input signal. The rack-mount unit is easily installed and smoothly integrates with existing equipment.

---

 

OSA 5030 PPS

A compact, cost efficient, high quality PPS distribution solution for OEM and integrators The OSA 5030 is specifically designed for applications where the square wave is the only acceptable type of signal. The OSA 5030 PPS Distribution Unit is very easy to install. The unit does not require any type of configuration as the output signals are direct image of input signal. The rack-mount unit is easily installed and smoothly integrates with existing equipment

 

---

OSA 5051/52 DUAL SWITCH

The 5051/5052 Dual Switch Unit is mainly designed for time and frequency applications where reliability criteria call for redundancy in RF and Pulse source. This unit accepts two input pairs consisting of one RF signal (sine/square) and one pulse (typically 1PPS). Both primary and secondary pairs are moni tored and in case of fault, the unit wi ll automatically switches to the other channel (Typically switching <3ms).

 

---

OSA 5130 Active Noise Filter (ANF)

The OSCILLOQUARTZ 5130 Active Noise Filter with patented BVA technology integrates the type of filter already present in Oscilloquartz’ highly successful top of the line OSA 5581C GPS-SR and 453x GPS-SB series, built into a 2U-high, 19" sub-rack format, complete with an integrated power supply (20-60V). The OSA 5130 Active Noise Filter provides 1 low noise output at 5 MHz (-125 dBc @ 1Hz) or 10 MHz (-115 dBc @1Hz).

 

---

F3 EQUIPMENT
	F3 Modular Frequency Equipment from Oscilloquartz is a highly Flexible approach to economic and efficient custom Frequency management. A wide range of shelves are available, to which are added a selection of plug-in modules to perform the required Functions. F3 shelves are based on the 19" standard and are perfectly suited for integration into OEM systems.

 

---

M211 - Time and Frequency Unit
	The M211 is a high capacity flexible timing system designed for use in any application where reliable time information is essential. It is ideal where synchronisation of many different output interfaces is required. With multiple options available the M210 offers 9x optional output interface slots for user system definition.

 

---

M210 - Time and Frequency Unit
	The M210 is a highly flexible timing system designed for use in any applications where reliable time information is required. It is ideal where synchronisation of different output interfaces is required. With multiple options available the M210 offers 3x optional output interface slots for user system definition.

---

M190 TIMING SYSTEM
	The M190 is an economic flexible timing system designed for use in any applications where reliable time information is required. It is ideal where synchronisation of a small number of external interfaces is required.