Our range of Wireless Solutions provide reliable, cost-effective solutions for Ethernet, T1/E1, and converged IP and TDM transport for both point-to-point and point-to-multipoint deployments. Backhaul, public access, and private network operator solutions.
Our solutions are available for the licensed 3.5 GHz band, unlicensed 5.4 GHz and 5.8 GHz bands and unlicesed free space optic solution. Choose the right one for you below or contact us for personal service.
Wireless Advantage
Wireless Solutions have emerged as an alternative to expensive landline and IP circuits. It is now possible to link one or multiple locations with high-speed links up to 50 miles long. One initial investment can replace ongoing monthly charges, charges that escalate as your data usage increases.
Alternately wireless links can provide a very inexpensive redundant or parallel link to carry voice and data traffic to meet business continuity requirements.
Typical Uses
- BTS to BSC Wireless Connections
- Rapid deployment military networks
- Connect T1/E1 circuits and high speed IP based equipment over long range wireless links
- Provide continuity services to land-line based T1/E1 facilities
- Provide converged backhaul services for TDM T1/E1 links and Wi-Fi™ hot-spots
- Provide a “quick-response” capability where sites need to be brought up in advanced of permanent land-line services
Radwin WinLink 1000
WinLink™ 1000 products are carrier-class, high capacity and extremely competitive point-to-point solutions.
With the ability to combine both legacy TDM and Ethernet services over 2.3-2.4GHz and 4.9-5.9GHz spectrum bands, the WinLink 1000 products are suitable for deployment in FCC and ETSI regulated countries.
The WinLink™ 1000 OFDM optical line-of-sight and non line-of-sight technology to overcome typical urban obstacles such as trees and buildings.
WinLink™ 1000 products provide high capacity connectivity of up to 48 Mbps, high range of up to 80km/50 mi, and rapid deployment of E1/T1s and Ethernet links at a fraction of the cost of leased lines or fiber. WinLink™ 1000 efficiently addresses service providers and private networks requiring immediate deployment of solutions for applications such as: multi-site connectivity, broadband access and backhauling. Available at multiple frequency bands and at various configurations, all WinLink™ 1000 products are highly robust, simple to install and extremely competitive.
The time division multiplexed (TDM) option can replace expensive leased full and fractional E1/T1 circuits while supporting legacy TDM traffic and increasing network capacity. Importantly where the WinLink™ 1000 has been deployed for this application in cellular backhaul environments it has proven accuracy in the transportation of synchronisation to the BTS/Node B, critical in ensuring quality of service, reducing call drop off and decreasing customer churn.
Features:
• Simple and fast installation
• Telco-grade, robust and reliable connection
• High data rate, up to 48Mbps
• Long Range, up to 80 Km (50 miles)
• Integrated solution for nxE1s/T1s and Ethernet
• Available in various spectrum bands:
5.725 – 5.850 GHz
5.470 – 5.725 GHz
5.250 – 5.350 GHz
4.940 – 4.990 GHz
2.400 – 2.4835 GHz
2.300 – 2.400 GHz
• OFDM based air-interface, enabling N-LOS deployments
• Compliant with FCC, IC and ETSI regulations
• Complete SNMP based local and remote management
WinLink™ 1000 Architecture
WinLink 1000 point-to-point solution is made up of a number of key components. Each side of the link comprises of an Indoor Unit (IDU) , Outdoor Unit (ODU) and an antenna . The link is managed via the WinLink 1000 Manager application.
The Indoor Unit (IDU) The IDU provides the user with TDM and Ethernet ports to connect to the link on both sides. The IDU is available in two configurations:
1./ IDU-E – a half 19' 1U plastic unit, providing one Ethernet port and 0-2 E1/T1 interfaces. The IDU-E complies with FCC/ETSI/CSA standards and can be powered via 110-240VAC or -48VDC.
2./ IDU-C – a 19' 1U metal unit, providing two Ethernet ports and 4xE1/T1 interfaces. The IDU-E complies with FCC/ETSI/CSA standards and can be powered via redundant 110-240VAC, -48VDC and 24VDC.
The Outdoor Unit (ODU) The ODU can be pole or wall mounted. It includes all radio components and connects to the IDU via a CAT5 cable. The different ODUs of the WinLink 1000 product family are available at various frequency bands and currently include the following options:
- 2.3 GHz
- 2.4 GHz (ETSI or FCC)
- 4.9 GHz (FCC)
- 5.3 GHz (FCC)
- 5.4 GHz (ETSI or FCC)
- 5.8 GHz (FCC)
The ODU comes in two different form factors:
- ODU with integrated 1ft flat panel antenna (available for most frequencies).
- ODU with a connector for an external antenna.
Antenna
RADWIN offers integrated and external antennas in different gains, sizes and shapes for each of the frequency bands supported by WinLink 1000. Third party external antennas can also be used.
WinLink 1000 Manager
The WinLink 1000 Manager is an SNMP based element and link management application which manages a complete link via a single IP address. The intuitive, easy-to-use Manager has a graphical MS-Windows interface, and can be utilized locally and remotely. WinLink 1000 Manager provides:
- Planning tools
- Installation Wizard
- On-line monitoring of air interface quality
- On-line monitoring of equipment alarms and QoS
- Local and remote loopback testing
- Configuration settings
- On-line user manual and help files
- Over-the-air software upgrades
The WinLink 1000 Manager can easily be integrated with any NMS system.
Horsebridge Services:
As well as supplying the AN-100, we also provide a host of supporting services, including:
• Installation.
• Commissioning.
• Technical support.
• Spares support.
• Product training.
If you would like to know more about the AN-100, then why not contact us now.
Radwin WinLink™ 1000 Datasheet
E1 Protocol Free Space Optic Products
PDH is networking technology based on ITU recommendations that enables the interconnection of digital network components (digital transmission sections, multiplex equipment, exchanges) to form international, national or even private digital links or networks.
The data rate is based on the 64Kbps digital channel. An E1 channel, for example, consists of 32 64 Kbps channels. E1 creates the base for high-speed PDH digital communication channels in Europe as well as other places. PDH devices can have higher rate connections such as E2 (4xE1 - 8 Mbps), E3 (16xE1 - 34 Mbps) etc. by bringing E1 channels together based on a standard hierarchy.
LaserBit offers a wide range of FSO products, which support E1 connectivity through industry standard interfaces.
PicoTel E1/TP series
PicoTel E1/CX series
PintoTel E1/TP series
PintoTel E1/CX series
LBTel-2000 E1/TP series
LBTel-2000 E1/CX series
LBTel-4000 E1/TP series
LBTel-4000 E1/CX series
Horsebridge Services:
As well as supplying the Free Space optic E1 Solutions, we also provide a host of supporting services, including:
• Installation Services.
• Commissioning Services.
• Technical support.
• Spares support.
• Product training.
If you would like to know more about the Free Space optic E1 Solutions from Horsebridge, then why not contact us now.
Fast Ethernet Free Space Optic Products
Ethernet is by far the most popular technology for Local Area Networks (LAN) due to its relative simplicity, cost-efficiency and extensive vendor support. Different versions of Ethernet network governed by IEEE 802.3 series standards can be differentiated based on the speed of the data transmission.
The original 10 Mbps technology has almost disappeared today as its speed has became insufficient for most of the applications, and network equipment have became more expensive than their faster counterparts. Fast Ethernet networks with their 100 Mbps data rate have been dominating the LAN market over the past few years, until recently when the newest member of the family started to conquer the market by offering GigaBit bandwidth.
LaserBit offers a wide range of FSO products both for Fast Ethernet and Gigabit Ethernet applications using industry standard fiber and copper network interfaces. In the followings those products are listed that offer Fast Ethernet connectivity.
PICO series
PINTO series
PRONTO series
PLUTO mobility E100TP series
PICOPLUS E100TP series
PINTOPLUS series
LB-1500 series
LB-2500 series
LB-5000 series
PintoPoE E100TP series
Horsebridge Services:
As well as supplying the Fast Ethernet FSO products, we also provide a host of supporting services, including:
• Installation Services.
• Commissioning Services.
• Technical support.
• Spares support.
• Product training.
If you would like to know more about the Fast Ethernet FSO products, then why not contact us now.
Combined Fast Ethernet and E1 Free Space Optic Products
The general the demand for “being connected” created a rapidly increasing bandwidth demand both in the IT and telecommunications sector. To increase the efficiency of communication links voice and data integration became a more and more popular solution.
One accepted technology is Voice Over IP (VoIP), which uses IP technology to transmit information. VoIP is a protocol that can be used over many kinds of networks and the quality depends on the network properties. Another common method is to create point to point connections providing industry standard interfaces for data and voice connections at both sides. In this case the quality of the transmission depends on the transmission equipment and the applied technology.
LaserBit offers voice and data integration based on its own proprietary products, which guarantee independent full wire-speed transparent transmission both for 2 Mbps G.703 (E1) signals and 100 Mbps Ethernet LAN over a high speed digital link.
PINTOseries
PRONTO series
LB-1500 series
LB-2500 series
LB-5000 series
Horsebridge Services:
As well as supplying the Combined Fast Ethernet and E1 FSO products, we also provide a host of supporting services, including:
• Installation Services.
• Commissioning Services.
• Technical support.
• Spares support.
• Product training.
If you would like to know more about the Combined Fast Ethernet and E1 FSO products, then why not contact us now.
Gigabit Ethernet Free Space Optic Products
Ethernet is by far the most popular technology for Local Area Networks (LAN) due to its relative simplicity, cost-efficiency and extensive vendor support. Different versions of Ethernet network governed by IEEE 802.3 series standards can be differentiated based on the speed of the data transmission.
The original 10 Mbps technology has almost disappeared today as its speed has became insufficient for most of the applications, and network equipment have became more expensive than their faster counterparts. Fast Ethernet networks with their 100 Mbps data rate have been dominating the LAN market over the past few years, until recently when the newest member of the family started to conquer the market by offering GigaBit bandwidth.
LaserBit offers a wide range of FSO products both for Fast Ethernet and Gigabit Ethernet applications using industry standard fiber and copper network interfaces. In the followings those products are listed that offer GigaBit Ethernet connectivity.
GigaPICO series
GigaPINTOseries
GigaPRONTO series
SuperGig series
Horsebridge Services:
As well as supplying the Gigabit Ethernet products, we also provide a host of supporting services, including:
• Installation Services.
• Commissioning Services.
• Technical support.
• Spares support.
• Product training.
If you would like to know more about the Gigabit Ethernet products, then why not contact us now.
Multiple E1 Free Space Optic Products
PDH is networking technology based on ITU recommendations that enables the interconnection of digital network components (digital transmission sections, multiplex equipment, exchanges) to form international, national or even private digital links or networks.
The data rate is based on the 64Kbps digital channel. An E1 channel, for example, consists of 32 64 Kbps channels. E1 creates the base for high-speed PDH digital communication channels in Europe as well as other places. PDH devices can have higher rate connections such as E2 (4xE1 - 8 Mbps), E3 (16xE1 - 34 Mbps) etc. by bringing E1 channels together based on a standard hierarchy.
LaserBit offers a wide range of FSO products, which support Multi E1 connectivity through industry standard interfaces.
PINTO TEL series
LB2000 series
LB4000 series
Horsebridge Services:
As well as supplying the Multiple E1 FSO products, we also provide a host of supporting services, including:
• Installation Services.
• Commissioning Services.
• Technical support.
• Spares support.
• Product training.
If you would like to know more about the Multiple E1 FSO products, then why not contact us now.
STM1/OC3 Space Optic Products
SDH and SONET are high speed digital networking technologies based on ITU recommendations (Europe) and ANSI standards (North America) respectively.
Their speed is superior to PDH systems therefore typically used in backbone connections. However, with the ever growing bandwidth demand they also play a more and more important role on the access network.
While the largest part of SDH/SONET connections provide 155 Mbps bandwidth, the capacity of today's PDH/SDH-based backbones can go well beyond Gigabit speed. LaserBit offers a range of FSO products supporting SDH/SONET connectivity by offering STM-1/OC3 interface.
PINTO TEL STM-1 series
LB2000 STM-1 series
LB4000 STM-1 series
Horsebridge Services:
As well as supplying the Multiple E1 FSO products, we also provide a host of supporting services, including:
.
• Installation Services.
• Commissioning Services.
• Technical support.
• Spares support.
• Product training.
If you would like to know more about the Multiple E1 FSO products, then why not contact us now.
RedMAX - Wi-Max Solution
Redline’s WiMAX solutions are designed to operate in a wide range of network designs and deployments, including point-to-point and point-to-multi-point, in urban and rural geographies.
With the advent of the WiMAX-based RedMAX family, Redline is delivering the benefits of its third-generation OFDM technology and its core products to a larger customer base, including operators with last-mile access requirements for SOHO and residential customers.
A carrier-grade base station, the RedMAX Base Station (AN-100U) is the key building block of the RedMAX family, able to support advanced applications, including voice, video, VoIP and prioritized data traffic to the RedMAX Subscriber units, which feature the Intel® PRO/Wireless 5116 broadband interface.
Horsebridge Services:
As well as supplying the AN-50e, we also provide a host of supporting services, including:
• Installation.
• Commissioning.
• Technical support.
• Spares support.
• Product training.
If you would like to know more about the AN-50e, then why not contact us now.
RedMAX Datasheet
If you can't find what you
are looking for then why not talk
to us and we will find a solution.
Whatever your last mile and backhaul requirements are,
Horsebridge has the answer.
“We have worked very closely with Horsebridge for a number of years and
continue to experience the highest level of pre- and post sales support. With their varied skills and knowledge base, Horsebridge are able to provide a totally joined up solution from the design stage through implementation to after sales support, giving Jersey Telecom the confidence that projects will run smoothly and within agreed timeframes. Furthermore, Horsebridge's team of technical experts are highly responsive to our urgent needs enabling us to focus on our daily core business requirements." 
“WiMAX networks issues can often stem from poor synchronisation — networks tend to be synchronised at the core, but not at the edge. As the industry experts in this space, Horsebridge were highly responsive to our needs by offering one of the first cost-effective carrier class solutions for enabling accurate data transmission across the entire metropolitan area. Through this partnership we will be able to ensure quality of service across the network while reducing the risk of any service interruptions to customers from interference.” 
“The content structure was appropriate to our requirements. The course content was clearly explained and the training staff knew the subject deeply, hence the synchronisation knowledge was strengthened, even for the more experienced participants. The practical part of the training was very useful as it focused on real case scenarios and our customers network. The overall rate for the training is very good, however I must say that for some people it was excellent.” 
"I have found that the services provided by Horsebridge have at all times been of the highest standards, their attention to detail and genuine willingness to help the customer are, I find, a pleasant surprise in these days of take the money and run." 
